The PRO V2 SHP was designed specifically for the Tippmann markers running RT and Cyclone Feed as well as Automags running RT. This regulator ships at 1100psi, ideal for increasing rate of fire for Automags to 20+ balls per second. You have the ability to remove 3 shims inside of the regulator to drop the pressure down to 950psi, which were found to be ideal on Tippmanns that are starving for air when using the RT and Cyclone Feed upgrades. Ninja recommends using Steel Braided line with the PRO V2 SHP.
The Ninja Pro V2 SHP Regulator gives you a full 360 degrees of rotation which allows you to relocate your gauge and fill nipple to point in any direction. Not only do you have more adjustability than ever before, the Ninja Pro V2 SHP Regulator uses a ball valve instead of the standard pin valve that other manufacturers are using. This new type of valve is less likely to leak than old school ones, and it boasts a 30% increased flow over its predecessor.
Features
30% Increased Flow
Improved Seal Integrity
Rotational 360 Degree
SHP (Super High Pressure) Output is adjustable from 950 - 1100psi
Made in the USA. Manufactured and assembled in their factory in Crystal Lake, IL